We do carry the Trailer Axle w/ Electric Brakes # e75SR which would be an upgrade to your 4,400 lb axles. You're just going to need to measure your hub-face to hub-face and your spring-center to spring-center.
This particular axle has an 89" hub face measurement and a 74" spring center measurement so if that's what you have then this axle will work great. If not, come back with those measurements and we'll find something for you.
You're also going to need new u-bolts. I recommend going... view full answer...
Lippert is a little funny when it comes to their 4,400 lbs axles. They don't have a true standard 4,400 lbs axle. Instead, they have some that use the same inner and outer bearings as a 3,500 lb axle (# L68149 and # L44649) and some that match the Dexter 4,400 lbs axles which use inner and outer bearings # L68149 and # LM67048.
Anytime I come across one of these axles I always ask to pull the outer bearing out and find the number stamped in the bearing.
The other option is to pull the... view full answer...
The dimensions of the Adco Tyre Gard RV Wheel Cover - Double Axle - 27" to 29" Diameter # 290-3933 are 70"L x 27"H x 9 inches deep. This will fit your 2015 Crossroads Sunset Trail 32RE very well based on the 5-1/2 feet wide dimension you gave. view full answer...
If you've already tried to pair the Replacement New-Style Linc Analog Remote # LC292614 following the attached instructions and are still unsuccessful, then you may have a blown fuse somewhere.
I recommend checking if a fuse has blown, and ensuring that your remote has a set of fresh batteries installed as well.
If you're having issues even after checking these few things, let me know and we can try and figure out what's going on. view full answer...
In regards to the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs, the float side is on the right part # LC26VR and the fixed is on the left part # LC84FR. view full answer...